“UTFILTER-PFS” SERIES
Filter elements of "UTfilter-PFS" series are submersible filter separators and are used to capture oil aerosols from the gas flow of screw compressors.
They are used in stationary filter-separators after compression. Effective operation requires prepurification of the gas at the compressor inlet. The permissible concentration level of mechanical impurities at the inlet is not more than 10 mg/m3.
| Inlet mechanical impurities concentration | not more than 10 mg/m3 |
| Residual oil content | 1-3 mg/m3 |
| Pressure difference at nominal load | 20 kPa |
| Maximum pressure difference | 500 kPa |
| Operating pressure | up to 2 MPa |
| Operating temperature | up to +100 °C |
| Heat resistance | up to +120 °C |
| Transportation and storage | 3(ZhZ) acc. to GOST 15150 |
| Mark | Diameter on the body | Diameter on the cover | Length, mm | Pressure difference at nominal load, kPa | Version |
|---|---|---|---|---|---|
| UTF.PFS.170.200.230.2 | 170 | 200 | 230 | 20 | 2 |
| UTF.PFS.170.200.305.2 | 170 | 200 | 305 | 20 | 2 |
| UTF.PFS.170.200.380.2 | 170 | 200 | 380 | 20 | 2 |
| UTF.PFS.300.355.350.2 | 300 | 355 | 350 | 20 | 2 |
| UTF.PFS.300.355.500.2 | 300 | 355 | 50 | 20 | 2 |
| UTF.PFS.300.355.700.2 | 300 | 355 | 700 | 20 | 2 |